1U3352 Bucket Tooth Fit for CAT J350 Style Heavy-Duty Excavator Long Tooth Kit

The 1U3352 Bucket Tooth provides structural strength for excavators and wheel loaders operating in dirt, gravel, clay, and general excavation environments.

1. Key Features

• Self-Sharpening Design: Maintains a sharp leading edge throughout its wear life for optimum bucket penetration and lower fuel consumption.
• High-Impact Alloy Steel: Manufactured from premium low-alloy steel to prevent breakage under extreme loads.
• Fully Heat-Treated: Through-hardened (HRC 48–52) for maximum abrasion and wear resistance.
• Side-Pin Locking System: Standard horizontal side-pin design ensures easy installation, tight fit, and fast field replacement.

2. Applications

• Equipment: CAT and aftermarket excavators, wheel loaders, and backhoes equipped with J350 adapters (e.g., CAT 320, 322, 325 series).
• Working Conditions: General construction, trenching, soil loading, sand, gravel, and light rock handling.

3. Technical Specifications & Accessories

4. Manufacturing Process

1. Precision Casting / Forging: Formed using precision investment casting or drop forging to ensure dimensional accuracy and zero internal defects.
2. Heat Treatment: Processed through quenching and tempering cycles to achieve an optimal balance of core toughness and surface hardness.
3. Quality Assurance: Rigorous ultrasonic and tensile testing guarantees shock resistance in demanding job-site conditions.

5. Installation Guidelines

1. Clean the Adapter: Remove dirt, rust, and debris from the adapter nose and pin hole.
2. Insert Retainer: Place the rubber/metal retainer sleeve (8E6359) into the side recess of the adapter nose.
3. Fit the Tooth: Slide the 1U3352 bucket tooth completely onto the adapter nose until pin holes align.
4. Drive the Pin: Insert the side pin (8E6358) from the side opposite the retainer and tap firmly with a hammer until fully seated and locked by the retainer.

6. Frequently Asked Questions (FAQs)

Q1: Does the 1U3352 bucket tooth come with the hardware required for installation?
A: Yes, each 1U3352 tooth comes complete with one 8E6358 locking pin and one 8E6359 retainer sleeve. Please confirm the details with the sales representative.

Q2: How do I verify if my bucket uses J350 series teeth?
A: Measure the adapter nose width or check your existing pin diameter. J350 side pins typically measure approximately 19mm (0.75 in) in diameter and 105mm (4.13 in) in length.

Q3: Can this tooth be used on non-CAT machinery?
A: Yes. As long as your bucket lip is equipped with standard J350 style weld-on or bolt-on adapters, this tooth will fit regardless of machine brand.