Small 2AH Bucket Teeth for Mini Excavators & Skid Steers GET Wear Parts

1. Applications

The 2AH Bucket Teeth Fit mini-excavators, backhoe loaders, skid steer buckets, and trenching equipment equipped.

Operating Conditions: General dirt excavation, topsoil stripping, sand and gravel loading, clay digging, and light demolition.

2. Product Overview & Features

• Self-Sharpening Wedge Profile: Designed with a tapered profile that maintains a sharp digging edge as it wears, maximizing penetration and reducing strain on machine hydraulics.
• High-Impact & Wear Resistance: Cast from premium low-alloy steel and through-hardened to withstand abrasive soils and heavy impact loading.
• Precision Fitment: Pre-drilled side pin holes ensure exact alignment with standard 2AH series adapters, minimizing wobble and shank wear.
• Smooth Earthmoving Performance: Optimized bucket lip contour improves material inflow and dumping efficiency.

3. Compatible Hardware & Accessories

1. Retaining Pins: Standard P2AH flex pin / roll pin lock system.
2. Adapters: Compatible with standard 2AH series weld-on shank adapters (e.g., 2AH-1.5, 2AH-2).

4. Manufacturing Process & Specifications

1. Material: Low-alloy steel (Cr-Mo steel blend for strength and impact toughness).
2. Production Method: Precision investment casting / lost-wax casting for tight tolerances and surface quality.
3. Heat Treatment: Fully quenched and tempered heat treatment.
4. Surface Hardness: 48–52 HRC (Brinell ~470–530 HB).
5. Finish: Protective anti-rust coating (black or yellow industrial enamel).

5. Installation Guidelines

1. Clear the adapter nose of dirt, rust, and old debris before mounting.
2. Align the 2AH tooth onto the adapter shank until the side pin holes match up.
3. Drive the retaining flex pin through the side mounting hole using a soft-face mallet or punch until fully seated in the locked position.
4. Perform visual inspections daily; replace retaining pins immediately if play or excessive wear is detected.

6. Frequently Asked Questions (FAQs)

Q1: How do I confirm if 2AH teeth are the right fit for my bucket?

A: Verify that the part number stamped on your existing tooth or adapter reads “2AH” or match the nose dimensions and side pin hole spacing against standard 2AH spec sheets.

Q2: Do these bucket teeth come with retaining pins included?

A: Hardware can be ordered separately or bundled as complete tooth-and-pin sets based on your procurement preferences.

Q3: Can 2AH bucket teeth be used for rock trenching?

A: 2AH teeth excel in general purpose dirt, sand, and light gravel digging. For high-abrasion rock or solid granite, heavy-duty rock chisel profiles are recommended.